Dewalt 18V XR Cordless Power Combo Tool Kit Body Woodworking & Industrial Range

  

Excel 18V 10 Piece Monster Tool Kit with 4 x 5.0Ah Battery Charger EXLKIT-16296. Dewalt Cordless Woodworking Power Tools Kit 18V Lithium DIY & Industrial Range.

DCF887N Brushless Impact Driver: High power Brushless motor outputting up to 205Nm of torque ensures heavy applications are completed quickly Application control is achieved through 3 motor speeds and torque settings including Precision Drive Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage Super lightweight and compact the tool is very comfortable to use and fits in small spaces 3x LED "Halo" light ring offers excellent workpiece lighting Runs on XR battery packs which offer great runtime and compatibility with all of your other 18V XR DEWALT Power Tools 1/4" (6.35mm)'drop in' bit holder allows for quick, one handed fitment Voltage: 18V Max Torque: 205 Nm Power Output: 400 Watt No Load Speed: 0-1000, 0-2800, 0-3250rpm Impacts per Minute: 0 - 3800 ipm Bit Holder: 6.35mm (1/4") Length: 134 mm Height: 195 mm Hand/Arm Vibration - Impact: 22 m/s² Uncertainty K 1 (Vibration): 2.1 m/s² Sound Pressure: 96 dB(A) Sound Pressure Uncertainty: 3 dB(A) Sound Power: 107 dB(A) Sound Power Uncertainty: 3 dB(A) DCD996N Brushless Combi Drill: All metal nitro-carburized chuck prolongs life as it is stronger and rust resitant Carbide inserts improve bit gripping strength and helps to minimise dropped bit frustrations 3 speed gearbox for a greater range of applications Larger brushless motor than previous model gives 34% increase in power Improved air flow to the motor Hammer Function increases speed to 2250rpm - Increased productivity Super bright LED with 3 LEDs which give a range from 2.6 to a massive 60 lumens Barcode: 5035048644515 Max Torque (Hard): 95 Nm Max Torque (Soft): 66 Nm Power Output: 830 Watt No Load Speed: 0-500/1500/2250 rpm Beats per Minute: 0-8600/25500/38250 bpm Chuck Capacity: 1.5-13 mm Max. Drilling Capacity (Wood): 55 mm Max. Drilling Capacity (Metal): 15 mm Max. Drilling Capacity (Masonry) 13 mm Length: 213 mm Height: 208 mm Width: 70 mm Sound Pressure: 97 dB(A) Sound Pressure Uncertainty: 3 dB(A) Sound Power: 108 dB(A) Sound Power Uncertainty: 3 dB(A) Hand/Arm Vibration - Drilling into metal: 2.5 m/s² Uncertainty K 1 (Vibration): 1.5 m/s² Hand/Arm Vibration - Hammer drilling into concrete: 15 m/s² Uncertainty K 2 (Vibration): 3.9 m/s² Hand/Arm Vibration - Screw driving without impact: 2.5 m/s² Uncertainty K 3 (Vibration): 1.5 m/s² DCD796N Brushless Combi Drill: 18V XR Li-Ion compact hammer drill driver Brushless Motor Technology for excellent efficiency Ultra compact, lightweight design allows use in confined spaces Two speed all metal transmission for increased runtime and longer tool life Drill Driver and Hammer feature for multiple applications 15 position adjustable torque control for consistent screw driving into a variety of materials Intelligent trigger design allows for total control of application Improved ergonomic design with rubber grip over mould improving users comfort Improved air flow to the motor for cooler electronics and increased power 3 position super bright LED light SET 1 = LOW LIGHT LED on for 20s 2.6 Lumens SET 2 = MEDIUM LIGHT LED on for 20s 18 Lumens SET 3 = HIGH LIGHT LED on for 20min 60 Lumens Li-Ion battery packs allows for superior insertion and removal with state of charge indicator Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster Max Torque (Hard): 70 Nm Max Torque (Soft): 27 Nm Power Output: 460 Watt No Load Speed: 0-550/2000 rpm Beats per Minute: 0-9350/34000 bpm Chuck Capacity: 1.5-13 mm Max.

Drilling Capacity [Wood]: 40 mm Max. Drilling Capacity [Metal]: 13 mm Max. Drilling Capacity [Masonry]: 13 mm Sound Pressure: 89 dB(A) Sound Pressure Uncertainty: 3 dB(A) Sound Power: 100 dB(A) Sound Power Uncertainty: 3 dB(A) Hand/Arm Vibration - Drilling into metal. Powerful and highly efficient PM58 DeWALT fan cooled motor with replaceable brushes Extremely durable design, including a cast magnesium base, which allows repetitive, accurate cuts Intelligent trigger allows total control over all applications Ergonomic handle set with rubber overmold provides optimum comfort to the user Key-less bevel angle and depth of cut adjustment with easy to read scale for maximum cordless versatility Spindle lock for quick and easy blade change Lock off switch and electronic motor brake for additional control and work safety Ultra thin kerf 165 mm, 24 tooth carbide-tipped blade allows for efficient run time and fast, smooth cut finishes Battery chemistry: XR Li-Ion Voltage: 18V Blade Diameter: 165 x 20 mm Power Output: 460 Watt Max. Depth of Cut: At 90º: 55 mm At 45º: 42.1 mm Length: 360 mm Height: 240 mm No Load Speed: 3700 RPM Bevel Capacity: 50 °.

DCS565N Brushless Circular Saw: The DEWALT DCS565 XR Circular Saw has a brushless motor for extended run time, reliability and durability. A lock-off switch and electronic motor brake provide additional control and work safety.

The dust blower and LED work light provide improved cut line visibility. It has an extremely durable design, including a cast aluminium base for repetitive, accurate cuts. With optimum balance for safe, fatigue-free operation and an additional handle that allows for safe, two-handed work.

A built-in rafter hook allows for convenient storage on the jobsite. No Load Speed: 4,950/min Max.

General purpose ripping, cross-cutting and bevelling circular saw for wood and other construction materials. High torque Brushless motor for durability and power for cutting job site and joinery materials. Stable block construction for low vibration running and long service life. Additional handle for safe two-handed work.

Variable adjustment of the bevel angle to 57 degrees. Optimum balance for safe, fatigue-free operation. Voltage: 18V No Load Speed: 5500 rpm Blade Diameter: 184 mm Blade Bore: 16 mm Bevel Capacity: 57° Max. Depth of Cut at 90°: 64 mm Length: 355 mm Height: 245 mm Hand/Arm Vibration: 2.5 m/s2 Uncertainty K 1 (Vibration): 1.5 m/s² Sound Pressure: 91 dB(A) Sound Pressure Uncertainty: 3 dB(A) Sound Power: 102 dB(A) Sound Power Uncertainty: 3 dB(A) DCW210N Brushless Orbital Sander: Variable speed to match the speed to the application. Texturized rubber overmold grip for more comfortable sanding.

Low height gets you closer to the work surface for more control when sanding. Brushless motor provides long run time. Replaceable 8-hole hook-and-loop sanding pad for quick, easy paper changing. Ergonomic design makes sanding more comfortable. Voltage: 18V No Load Speed: 8,000-12,000/min Orbit Size: 2.6mm Paper Size: 125mm DCE800NB Brushless Drywall Sander: Brushless motor provides longer runtime, increased durability, and consistent speed Variable speed dial allows for easy speed changes to suit all sanding applications Ventilated sanding backing pad delivers best in class dust extraction when combined with mesh sanding sheets Telescopic handle offers speedy sander length changes from 1.2 - 1.6M without the need to turn off the sander AirLock connector allows for universal fitment to any Dewalt dust extractor Side positioned head mounted dust extraction hose provides clear line of sight to work area and allows for access into tight spaces Lock on trigger switch allows for comfortable use over long periods of use Voltage: 18V Speed Control: Variable Speed Wireless Tool Control - WTC: Yes Oscillating Speed: 700-1,200/min Disc Diameter: 225mm Sanding Type: Disc Length: 1.2-1.6m Pack Size: 1 DCW200N Brushless Palm Sander: The DEWALT DCW200 XR Brushless 1/4 Sheet Palm Sander utilises cordless technology for more user freedom. Its brushless motor offers superb run time and durability. A dust-sealed switch and dust-sealed bearings provide prolonged product life. A textured anti-slip top and body grip provide ultimate comfort and control during use. Fitted with a hook & loop platen that provides faster paper changes, better dust extraction and increase sanding efficiency. Paper clamps are also provided for conventional abrasives. The Airlock dust port allows for a secure connection between the tool and dust extractor, keeping the working area clean and free from debris. It is also Wireless Tool Control compatible. This allows the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app.

Oscillating Speed: 8,000-13,500/min Paper Size: 140 x 115mm Pad Size: 108 x 115mm DCG405N Brushless Angle Grinder: 18V Brushless Motor Improved performance in demanding applications Electronic Brake stops the wheel quickly when the trigger is released Electronic Clutch Reduces the kick back reaction in the event of a pinch or stall Mesh Covers restricts dust being sucked through the motor Rubber Overmould provides enhanced grip and comfort Two Position Side Handle offers greater comfort and control Voltage: 18V Power Output: 800 Watt Power Input: 1000 Watts No Load Speed: 9000 rpm Max. Disc Diameter: 125 mm Spindle Thread: M14 Length: 310 mm Hand/Arm Vibration - Grinding: 4.4 m/s² Uncertainty K 1 (Vibration): 1.5 m/s² Hand/Arm Vibration - Sanding: 2.5 m/s² Uncertainty K 2 (Vibration): 1.7 m/s² Sound Pressure: 85 dB(A) Sound Pressure Uncertainty: 3 dB(A) Sound Power: 96 dB(A) Sound Power Uncertainty: 3 dB(A) DCG412N Angle Grinder: Latest generation premium Grinder featuring new XR Lithium Ion Technology Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster Powerful and Highly Efficient PM58 DEWALT fan cooled motor with replaceable brushes, delivers up to 7000 rotations per minute for fast cutting and grinding applications Steel cut spiral bevel gears provide highest level of durability and low vibration, increasing user productivity Low profile jam pot gear case improves gear durability and ergonomics Intelligent trigger & lock-off switch for enhanced work safety and control Voltage: 18V Max.

Disc Diameter: 125mm Power Output: 405 Watts No Load Stroke Rate: 0-7000 rpm Spindle Thread: M14 Length: 400mm DCG405FN Brushless Angle Grinder: Innovative brushless motor technology - higher power, more compact dimensions, longer battery life and longer life. Combination of electronic clutch and brake minimizes the risks of kickbacks even more effectively. Epoxy resin armored windings protect the engine from abrasive dust particles. Optimized fan system - effectively cools angle grinders and electronics during use and increases service life. Perform & Protect: Electronic brake reliably stops the disc in seconds. Variable light settings for maximum brightness or extended runtime 250-500 lumen output with broad and even beam pattern Up to 10 hours runtime Nine position articulating lamp head for directional control of light output Extendable hanging hook allows worklight to be suspended during use Battery chemistry: XR Li-Ion Voltage: 18 V Bulb Type: LED Light Output: 250-500 lm Protection Class: IP54 Height: 345 mm Length: 95 mm. Compact, lightweight design with impact resistant housing Improved ergonomic design and rubber grip increase comfort The LED Bulb produces 110 Lumens output (10,000Hr Life) with a 2 Zone light pattern Flashlight head pivots more than 90 degrees vertically with ratchet lock Integrated hook for hanging however it can be used free standing Bulb Type: LED Battery Chemistry: Li -Ion Light Output: 110Lm Height: 240 mm Length: 115 mm. DCB182 4.0Ah Battery: DEWALT XR Li-Ion Battery Technology offers extended runtime and optimised power to complete applications quickly Lightweight design provides the user with 18V power for the equivalent of 12V NiCd/NiMH pack weight No memory effect and virtually no self-discharge for maximum productivity & less downtime Compatible with all DEWALT XR Li-Ion 18V Tools Excellent electrical characteristics Part Number- DCB182 Pack Qty - 1. Battery Capacity - 4.0Ah. Compatible with - All 18V XR Li-Ion DEWALT tools. DCB184 5.0Ah Battery: The new DEWALT 5.0Ah XR Li-Ion battery packs will deliver 66% more runtime than a standard 3.0Ah battery pack LED State of Charge Indicator helps manage pack charging Lightweight design provides the user with upgraded 5Ah Power without increasing the size or weight over the 18V 3Ah battery pack No memory effect and virtually no self-discharge for maximum productivity and less downtime Compatible with all DEWALT XR Li-Ion 18V Tools Protection against overheat, overload and deep discharge conditions increases battery life Excellent electrical characteristics Pack Qty - 1 Battery Capacity - 5.0Ah Voltage - 18V Height - 65mm Length - 110mm Features - XR Li-Ion Compatible with - All 18V XR Li-Ion DEWALT tools.

DCB115 Multi Voltage Charger: Charges XR Li-Ion DeWalt 10.8V, 14.4V, 18V Slide Pack batteries. Diagnostics with bright LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold. Voltage: 230v Battery Voltages: 10.8v / 14.4v / 18v Battery Chemistry: Li-Ion Charging Current: 4.0 A Charging Time: 30 mins (2.0Ah) Charging Time: 60 mins (4.0Ah) Width: 115 mm Height: 80 mm Length: 150 mm DWST83442-1 ToolBox Set with Trolley: Wider & stronger handles for better ergonomics Half Module compatibility allowing half width modules to be connected to the box Fully backwards compatible to toughsystem 1 modules Auto stacking latches intuitive, easy to use and time saving latches for connecting modules together Easy close metal wire front latches providing easy one handed operation High performance seal in the lid ensures they are dust tight and water jet resistant (IP65) to withstand the most severe weather Name panel insert allowing boxes to be labelled up by end users for easy identification of contents Metal reinforced padlock eye providing superior security to the contents Dewalt tracker ready internal fixing point allows dewalt tracker to be installed and box tracked via dewalt tool connect Increased depth moving to 16.5cm deep vs 15.0cm Maximum load steps 79kg 8 inch rubber wheels Back compartment for longer tools such as a 26 inch saw Metal trolley for loading materials and heavy loads Height adjustable foldable brackets allow tailored configuration Central locking mechanism secures the toughystem storage boxes to the frame Maximum load flat 120kg Part Number: DWST83442-1 Barcode: 5055284479238 Stackable: Yes Wheeled: Yes Dimensions DS166 (W x H x L): 554 x 165 x 371mm Dimensions DS300 (W x H x L): 554 x 308 x 371mm Dimensions DS400 (W x H x L): 554 x 408 x 371mm Dimensions Trolley (W x H x L): 660 x 1092 x 508mm DWST83412-1 TSTAK Stacking Case Toolbox: DeWALT Tracker Ready - Fixing point built into the TSTAK box to allow a DEWALT Tracker to be installed and the box tracked via DEWALT tool connect. IP54 Water seal - Providing water and dust protection to tools and fixings inside the box (excludes drawer module).

100KG Total load capacity (100kg - Cart, 30kg Shallow Box, 30kg Deep Box, 20kg Organiser, 7.5kg Drawer) Removable cups in the organizer. Removable covered cups in the deep drawer unit. Lockable - Via padlock (not included) for added security (excludes organiser). Heavy duty metal front latches - increasing strength, durability and longevity.

Metal-pin side latches - allowing TSTAK modules to be connected together. The metal pin design provides longer life.

TSTAK 2.0 Range (Compatible with TSTAK 1.0 & TSTAK 2.0) Part Number: DWST83412-1 Brand: Dewalt Model Number: DWST83412-1 Product Type: TSTAK 2.0 Tower Toolbox Total load capacity: 100kg Length: 486 mm Height: 708 mm Depth: 436 mm Weight: 19.00kg DWST83294-1 Toolbox: The DEWALT TOUGHSYSTEMT 2.0 Toolboxes feature a high-performance seal in the lid, this ensures they are dust-tight and waterjet resistant (IP65) to withstand the most severe weather. With easy close, metal wire front latches for easy one-handed operation. A metal-reinforced padlock eye provides increased security Fitted with strong, ergonomic handles for more comfortable transportation. Auto Stacking Latches are intuitive and easy to use, allowing TOUGHSYSTEMT modules to be connected together.

These newer style latches are compatible with older TOUGHSYSTEMT modules. DEWALT Tracker compatible, an internal fixing point allows the DEWALT Tracker to be installed and the box tracked via the DEWALT Tool Connect App. There is also a handy name panel insert, this allows boxes to be labelled for easy identification.

Depth: 308mm Width: 554mm DS150 Tool Box: Engineered plastic side clips allows stack ability with other boxes. When carrying the toolboxes by hand, they can also be fastened together, allowing them to be carried as a stack. Heavy duty metal latches and hinges for added durability. Bi-material comfortable top handle is easy to grip.

Locking side handles offer alternative lifting and easier maneuverability. DEW183347 TSTAK: Metal-Plastic telescopic handle for easy carrying Durable 7 wheels for maneuverability Large volume useful box for bulky items Nameplate for content identification Dimensions: 435mm x 1000mm x 512mm Product Material: ABS Pack Size: 1 Case Type: Chest Stackable: Yes Wheeled: Yes DWST1-70703 TSTAK II Tool Storage Box. Solid metal hinges and heavy-duty metal latches make it highly robust 13.5 Litre volume unit for storing hand tools and power tools Side latches allow connectivity for easy carrying and safe stacking Built-In bi-material handle improves user comfort Strong & tough metal latches and metal hinges for heavy duty use Width: 440 mm Depth: 176 mm Height: 331 mm. Weather proof Hard bottom Zip fastening Double stitched Heavy duty pockets. 58L capacity Two way zipper Durable and long-lasting Adjustable shoulder strap Tear-resistant polyester material Wide top opening for immediate access to the tools you need Hard base bottom that provides stability and support to the bag Compartments and pockets to help organize tools and accessories Cushion protected carry handle ensures comfort, even with heavy tools Colour: Black Material: Polyester Type: Hard Base Capacity: 58L Internal pockets: 10 External pockets: 12 Dimension (L x W x H): 55 x 30 x 35cm Zipped: Yes Wheels: No. 43L capacity Two way zipper Instant pocket access Durable and long-lasting Tear-resistant polyester material Adjustable shoulder strap and padded carrying handle Wide top opening for immediate access to the tools you need Splash proof & Hard base provides extra durability Multiple pockets to help organize tools and accessories Colour: Black Material: Polyester Capacity: 43L Internal pockets: 12 External pockets: 13 Dimension (L x W x H): 45 x 28 x 34cm Zipped: Yes Wheels: No. Spacious Interior ample storage space to accommodate a wide range of tools Wide opening for immediate access to the tools you need Made from high-quality materials this bag is designed to withstand tough conditions and heavy use Multiple pockets to help organize small tools and accessories, keeping them easily accessible Telescopic Handle adjusts to your height for comfortable carrying Padded handle ensures comfortable carrying, even when the bag is fully loaded Tear-resistant polyester material Built-in wheels make it easy to transport heavy loads, reducing strain on your back and shoulders Size: 26in Colour: Black Zipped: Yes Wheel: Yes. Images for illustrative purposes only - please refer to description and specification for full details of product. Additional charges will be imposed if, weight is more than 1kg. Postcodes Details are Given Below. HS 1-9, I 1-56, KA27-28, KW1-17, PA20-49, PA62-77, PA60-61, PA78, PH17-26, PH-30-44, PH49-50, ZE1-3, BT1-94, IM1-9, IM99, TR21-25, Isle Of Wight. If, you receive any Parcel from us that contains damaged goods, this should be notified to customer services who will arrange for collection and replacement, within the 24-48 hours period.