Makita DHP486ZJ 18v LXT Brushless Heavy Duty Combi Drill Body Only In Makpac Car

  
Makita DHP486ZJ 18v LXT Brushless Heavy Duty Combi Drill Body Only In Makpac Carry Case Makpac Type 2 with inlayThe Makita DHP486RTJ 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications. The previous model3 Drilling Modes screwdriving mode rotation with clutch for achieving an even consistent finish when fastening screws. Drilling mode rotation only achieving 130Nm max. Hammer Drilling mode rotation with hammering on the for drilling in masonry up to a maximum 16mm hole diameter.

LED Joblight high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during applicationHigh Power Output This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.

2 Speed Mechanical Gearing high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation. All metal gear construction allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.

XPT Extreme Protection Technology protects the tool against dust moisture even in the harshest jobsite conditions, increasing durabilitySold as body only in a carry case with inlay. FEATURESMassive drilling capacity with 152mm hole saw 50mm auger bit capacityCompact overall length of only 178mm for use in narrow work spacesHigh powered Brushless Motor produces 130Nm peak torqueHigh durability aluminium gear housingMechanical 2 speed gearing with all metal gear constructionForward reverse rotationSingle sleeve keyless chuck allows for easy bit installationremoval by one handElectric brakeVariable speed control by triggerBest possible ergonomic handle for drill-driver applicationsLED job lightBelt clipXPT - Extreme Protection TechnologySPECIFICATIONVoltage 18vSoft Application Max Torque Nm 65Hard Application Max Torque Nm 130Torque Settings 21 DrillBrake Type ElectricNo.

Of Gears 2LED Job Light Yes Twin Pre-glow After-glowBattery Capacity Indicator NoBattery Compatibility 18v Lithium-Ion LXTRotation Forward ReverseVariable Speed Control Trigger YesNo Load Speed RPM High 0-2100No Load Speed RPM Med NANo Load Speed RPM Low 0-550Chuck Type 3-Jaw Single Sleeve Keyless All MetalChuck Capacity mm 13Screw Capacity Machine Screw mm 6Screw Capacity Wood Screw mm 10 x 90Drill Capacity Concrete mm 16Drill Capacity Metal mm 13Drill Capacity Wood mm 76Impact Rate BPM High 0-31500Impact Rate BPM Med NAImpact Rate BPM Low 0-8250Overall Length mm 178Net Weight Approx. Kg with 1.52Ah Batt 2.3Net Weight Approx. Kg with 345Ah Batt 2.7Brushless Motor YesNOISE VIBRATIONSound Pressure Level LpA 84 dB ASound Power Level LWA 95 dB ASound Uncertainty K 3 dB ADrilling Concrete Vibration Emission ah 8.0 msDrilling Concrete Vibration Uncertainty K 1.5 msDrilling Metal Vibration Emission ah 2.5 msDrilling Metal Vibration Uncertainty K 1.5 ms.