Makita DLX2025 18v Combi Drill and Hammer Drill 2 x 3.0ah Li-ion

  

Makita DLX2025 18v Combi Drill and Hammer Drill 2 x 3.0ah Li-ion. Makita 18v Cordless Twin Kit including a Combi Drill and Rotary Hammer Drill.

Comes Complete with 2 x 18v Li-ion Battery and Charger. DC18RC - DC18RC Compact Charger DHP453Z - 18V LXT Combi Drill DHR202Z - 18V Rotary Hammer SDS Plus 20mm 194204-5 - 18V 3.0ah Li-ion battery x 2. The Li-ion range delivers 430% more working capacity during it's lifetime compared to Ni-Cad and is 40% Lighter than Ni-MH. The Li-ion has minimal depletion of power during use or in storage over it's lifetime. Slide on battery - firm holding with multi contacts and shock absorbing pack, will not puncture and remains cool even in heavy use. Voltage - 18 v Battery ID - BL1830. DHP453Z 18v LXT Combi Drill.

22 minute charge time with the air cooled Makstar Optimum Charging System. Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time. Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery. Conveniently located push button for forward and reverse. Voltage - 18 v Max.

In masonry - 13 mm Max. In steel - 13 mm Max. In wood - 36 mm Blows per minute - 19500 - 6000 bpm Noise sound pressure - 78 dB(A) Noise sound power - 3 dB(A) No Load Speed - 1300 - 400 rpm Max Torque - 42 Nm Torque Settings - 16 + drill Vibration: Drilling - 2.5 m/sec² Vibration K factor - 1.5 m/sec² Vibration: Hammer Drilling - 7.5 m/sec² Net weight - 1.7 kg. DHR202Z 18v Rotary Hammer SDS Plus 20mm. Lithium-ions 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery. LED job light with afterglow. One-touch sliding chuck for easy bit changes. Triple operation mode: Rotary only, hammer only and rotary hammer. Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions. Voltage - 18 v Max in concrete - 20 mm Max. In wood - 26 mm Impact energy - 2.0 J Blows per minute - 0-4000 bpm Noise sound pressure - 87 dB(A) Noise sound power - 98 dB(A) Noise K factor - 3 dB(A) No Load Speed - 0 - 1100 rpm Vibration: Drilling - 3 m/sec² Vibration K factor - 1.5 m/sec² Vibration: Hammer Drilling - 14.5 m/sec² Vibration: Chiselling - 11 m/sec² Net weight - 3.2 kg.

Battery Range - 14.4 - 18 v Battery Type - Li-ion. Credit / Debit card - please call 01303 852692 - dispatch to cardholder registered address only.

Bank transfer - please call 01303 852692 for more information. AB, BT, FK, GY, HS, IM, IV, KA, KW, PA, PH, ZE, all Islands excluding IOW. Orders are dispatched on one of the following services. (Details are within each listing). All customers should expect to receive their orders within 2-3 days maximum.

The following postcodes may take an additional day. AB, BT, IV, KW, PA, PH, all Islands. FFX reserve the right to change the terms, set out above, at any time. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

The item "Makita DLX2025 18v Combi Drill and Hammer Drill 2 x 3.0ah Li-ion" is in sale since Tuesday, July 12, 2016. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets".

The seller is "folkestonefixings" and is located in Folkestone. This item can be shipped to United Kingdom, European Union member countries.

• Battery Capacity: 3 Ah
• Battery Included: Yes
• Battery Technology: Lithium-Ion (Li-Ion)
• Chuck Size: 13mm
• Number of Batteries: 2
• Power: Cordless Electric
• Power Source: Battery
• Type: Combi Drill
• Voltage: 18 V
• Brand: Makita
• MPN: DLX2025
• Weight: 10kg
• Height: 40cm
• Width: 30cm
• Depth: 20cm
• Manufacturer Part Number: DLX2025
• Item Weight: 10kg
• Item Height: 40cm
• Item Width: 30cm
• Item Depth: 20cm