Stanley FatMax V20 18V Cordless Brushless Twin Kit 2 x 4.0Ah. SFMCD715 Combi with 55Nm torque SFMCF810 Impact with 170Nm torque Integral LED work light Max drilling: 13mm masonry, 13mm steel, 30mm wood Includes: Charger and soft kit bag The Stanley FatMax SFMCK461M2S V20 18V Cordless Brushless 2 Piece Kit features improved battery technology, with no memory effect and minimal self-discharge. The 2 speed drill includes a powerful motor providing up to 1,900 rpm and 60 Nm of torque for efficient drilling into wood, and metal, while the powerful hammer action provides up to 32,300 bpm for efficient drilling into masonry. The impact driver delivers a powerful 170 Nm of torque, perfect for driving and removing tight long screws, bolts and fixings. Part of the new V20 18V Stanley FatMax cordless system??
Power all your V20 tools with a common, new and improved 18V lithium ion battery to let you power through work with ease. 18V Stanley FatMax V20 cordless system - power all V20 tools with a common new & improved 18V lithium ion battery to let you power through work with ease Brushless motor technology for improved power efficiency, longer runtime and extended working life Improved battery technology, no memory effect and minimal self-discharge Integral battery state of charge indicator for convenient monitoring of battery charge levels Integrated LED work light for improved visibility in all working conditions with a 20 second delay feature Hammer drill: powerful motor providing up to 1,900 rpm and 60 Nm of torque for efficient drilling and screwdriving into wood, metal and plastic Hammer drill: powerful hammer action provides up to 32,300 bpm for efficient drilling into masonry Impact driver: powerful motor providing up to 2,800 rpm, 3,500 bpm and 170 Nm of torque for driving larger fasteners and other high torque applications Ultimate reliable kit for heavy duty drilling and fixings Perfect for a variety of jobs around the home and garden, including furniture assembly, hanging pictures, shelves, curtain rails or outside lights, decking and other outdoor jobs Can be used on brick walls, wood, metal, plastic and tiles Comes with 2 x 4.0Ah batteries, charger and soft storage bag.Stanley FatMax SFMCD715 Drill 18V V20 battery platform Brushless motor Max. 60 Nm of torque Max. Drilling capacity (masonry): 13mm Max.
Drilling capacity (steel): 13mm Max. Drilling capacity (wood): 30mm 2 speed gearbox 15 clutch settings Keyless chuck for easy bit changes Stanley FatMax SFMCF810 Impact Driver 18V V20 battery platform Brushless motor Max. 170 Nm of torque Quick release chuck for easy one handed bit changes.
Take on twice as many jobs by doubling up with this power tool twin pack. The combi drill and impact driver in this kit are both part of the Stanley FatMax 18V V20 cordless system?? It features improved battery technology with no memory effect and minimal self-discharge, giving you impressive performance and runtime to power through work with ease.The two-speed drill includes a powerful motor providing up to 1,900 rpm and 60 Nm of torque for efficient drilling into wood and metal, while the hammer action provides up to 32,300 bpm for efficient drilling into masonry. The impact driver delivers a powerful 170 Nm of torque?? Perfect for driving and removing tight long screws, bolts and fixings. Both tools feature a powerful and efficient brushless motor, and come with two 4.0Ah batteries plus a charger to ensure you never run out of juice on the job. Re perfect for a variety of jobs around the home and garden, including furniture assembly, hanging pictures, shelves, curtain rails or outside lights, decking and other outdoor jobs. Part of the 18V Stanley FatMax V20 cordless system. Brushless motor for improved power efficiency, longer runtime and extended working life. Improved battery technology, no memory effect and minimal self-discharge. Integral battery state-of-charge indicator for easy monitoring of battery charge levels. LED work light for improved visibility in all working conditions, with a 20-second delay feature. Powerful motor providing up to 1,900 rpm and 60 Nm of torque for efficient drilling and screwdriving into wood, metal and plastic.
Powerful hammer action provides up to 32,300 bpm for efficient drilling into masonry. Powerful motor providing up to 2,800 rpm, 3,500 bpm and 170 Nm of torque for driving larger fasteners and other high torque applications. Ultimate reliable kit for heavy-duty drilling and fixings. Can be used on brick walls, wood, metal, plastic and tiles. Comes with 2x 4.0Ah batteries, charger and soft storage bag.
Stanley FatMax SFMCD715 Drill Specifications. Maximum 60 Nm of torque. Maximum drilling capacity (masonry): 13mm. Maximum drilling capacity (steel): 13mm. Maximum drilling capacity (wood): 30mm.Keyless chuck for easy bit changes. Stanley FatMax SFMCF810 Impact Driver Specifications. Maximum 170 Nm of torque.
Quick-release chuck for easy one-handed bit changes. Toolstation is one of Britain's fastest growing suppliers of tools, accessories and building supplies to the trade, home improvers and self-builders.We are the WHICH recommended provider for DIY High Street Shops 2019 and were Which retailer of the year 2016 and 2017. We operate over 500 shops across the UK and are rapidly expanding. We want to ensure that your order is delivered quickly and safely so we have given careful consideration to the carriers we use to fulfil them. This website is operated by Toolstation Limited (referred to as "Toolstation/we/our/us"). We are Toolstation Ltd, a company registered in England with registration number 04372131. Our registered address is Lodge Way House, Lodge Way, Harlestone Road, Northampton, NN5 7UG. When you (the person named on the order) place an order with us, we will do business with you under the following terms. 1.1 We reserve the right to change these terms and conditions at any time.
Any such changes will take effect when posted on the website (see date at the top) and it is your responsibility to read the terms and conditions on each occasion you use this website and your continued use of the website shall signify your acceptance to be bound by the latest terms and conditions. 1.2 If you are not a consumer, you confirm that you have authority to bind any business on whose behalf you use this website.1.3 Certain website services will require registration and subsequent access to those services will be subject to an approved login name and password ("Password Details"). Information that you provide on this website must be accurate and complete. All Passwords Details are accepted and may be withdrawn at our sole discretion and are exclusive to you and non-transferable and must be treated as strictly confidential at all times. In the event that you have any concerns regarding your Password Details or become aware of any misuse then you must inform us immediately (see Help for more information and full contact details). All orders that you place on this website will be subject to acceptance in accordance with these terms and conditions. 2.2 The'confirmation' stage sets out the final details of your order. 2.4 We do not file details of your order for you to subsequently access direct on this website, and therefore, please print out these terms and conditions and the order acknowledgement for your own records. Goods are subject to availability.
In the event that we are unable to supply the goods, we will inform you of this as soon as possible. Toolstation is not responsible for the content of external websites. By accepting these terms and conditions you consent to such checks being made. In performing these checks personal information provided by you may be disclosed to a registered Credit Reference Agency which may keep a record of that information. All information provided by you will be treated securely and strictly in accordance with relevant data protection laws.3.3 Online price errors. If we discover an error in the price of goods ordered or reserved, we will inform you as soon as possible e. Prior to the goods being despatched or in store prior to the collection of the goods.
We will provide you the option of reconfirming your order at the correct price or cancelling it. If we are unable to contact you we will treat the order as cancelled. We are part of the Travis Perkins Group and our shared VAT number is GB 408 556 737. We make every effort to deliver goods within the estimated timescales, however delays are occasionally inevitable due to unforeseen factors.
Toolstation shall be under no liability for any delay or failure to deliver the products within estimated timescales. 4.2 We will deliver your order to any address in the UK. We will confirm this with you at the time you place your order. 4.3 Risk of loss and damage of products passes to you on the date when the products are delivered to you or are left with a person or place nominated by you. 4.4 Unless we have your written authorisation, we will always need an authorised signature when delivering goods to you.4.5 We aim to keep enough stock so that we never run out. However, at times when there is unexpectedly high demand, we may unfortunately run out. If this happens, we may delay sending out your order for a couple of days while we get new stock, we will let you know about our progress.
4.6 We are unable to deliver to Northern Ireland, BFPO or the Channel Islands. 5.1 If you want to cancel your order, you can do so at any time until we send it out.
Your rights, defined in the Consumer Rights Act 2015, are not affected by these terms. 5.4 We are constantly updating our products, prices and offers. We are confident of our technology and staff but we realise that we sometimes may make mistakes. If we offer goods for sale incorrectly, we will always try to honour our offer.
There may be rare circumstances where it is not possible for us to do this. In these cases, we will contact you and explain the situation. 5.5 If things like strikes, wars, acts of terrorism or even small things like power cuts interfere with our business with you, we will do our best to keep things going.However, we will not be legally responsible to you for any failure which is due to these unexpected circumstances or any other situation outside our control. 5.6 All sizes and measurements are approximate but we do try to make sure that they are as accurate as possible. 6.1 Nothing in these terms of business should affect your legal rights or limit our legal responsibility for death, personal injury or fraudulent misrepresentation resulting from our negligence, or any other liability which we cannot limit or exclude by law.
This includes our legal responsibility under section 2(3) of the Consumer Protection Act 1987. We will not be legally responsible to you for any losses which both we and you could not expect at the time you bought the goods. If you are a trade customer, we will not be legally responsible to you for any business losses.6.2 These terms of business will be governed by English law. Any disputes will be dealt with by the English courts. 7.1 Nothing in these terms and conditions excludes or limits liability for death or personal injury caused by negligence, fraudulent misrepresentation, or any other liability which may not otherwise be limited or excluded under applicable law. 7.3 Subject to Section 7.1 above, other than as expressly provided in these terms and conditions with respect to specific products and except for the exclusive remedies set out at Section 5 above, any indemnities, warranties, terms and conditions (whether express or implied) are hereby excluded to the fullest extent permitted under applicable law. 7.4 Subject to Section 7.1 above, Toolstation will not be liable, in contract, tort (including, without limitation, negligence), pre-contract or other representations (other than fraudulent on negligent misrepresentations) or otherwise out of or in connection with the terms and conditions for any.
Economic losses (including without limitation loss of revenues, data, profits, contracts, business or anticipated savings); or. Loss of goodwill or reputation; or. Loss of privacy and loss of data; or. Suffered or incurred by that party arising out of or in connection with the provisions of any matter under these terms and conditions.7.5 Notwithstanding the above, subject to Section 7.1 Toolstation's aggregate liability (whether in contract, tort or otherwise) for loss or damage shall in any event be limited to a sum equal to the amount paid or payable by you for the product(s) in respect of one incident or series of incidents attributable to the same clause. 7.6 This clause 7 does not affect your statutory rights as a consumer, nor does it affect your contract cancellation rights. 8.1 The contract between us shall be governed by the laws of England and any dispute between us will be resolved exclusively in the courts of England. English is the only language offered for the conclusion of the contract.
8.2 Our maximum liability to business users arising out of or in connection with the products shall be limited to the replacement value of the product in question (except in the case of death or personal injury caused by our negligence or in respect of fraud). 8.3 Toolstation shall be under no liability for any delay or failure to deliver products or otherwise perform any obligation as specified in these terms and conditions if the same is wholly or partly caused whether directly or indirectly by circumstances beyond its reasonable control. 8.4 You may not assign or sub-contract any of your rights or obligations under these terms and conditions or any related order for products to any third party unless agreed upon in writing by Toolstation. 8.5 Toolstation reserves the right to transfer, assign, novate or sub-contract the benefit of the whole or part of any of its rights or obligations under these terms and conditions or any related contract to any third party.
8.6 If any portion of these terms and conditions is held by any competent authority to be invalid or unenforceable in whole or in part, the validity or enforceability of the other sections of these terms and conditions shall not be affected. 8.7 These terms and conditions do not create or confer any rights or benefits enforceable by any person that is not a party within the meaning of the U. Contracts (Rights of Third Parties) Act 1999 except: a Travis Perkins (as defined below) shall have the right to enforce any rights or benefits under these terms and conditions; b Travis Perkins shall have the right to enforce and take the benefit of the rights or benefits of any limitation or exclusion or limitation of liability in these terms and conditions; c a person who is a permitted successor or assignee under Section 8.7 above of the rights or benefits of these terms and conditions may enforce such rights or benefits. D No consent from the persons referred to in Section 8.8 is required for the parties to vary or rescind these terms and conditions (whether or not in any way that varies or extinguishes rights or benefits in favour of such third parties). 8.8 No delay or failure by Toolstation to exercise any powers, rights or remedies under these terms and conditions will operate as a waiver of them nor will any single or partial exercise of any such powers, rights or remedies preclude any other or further exercise of them.
Any waiver to be effective must be in writing and signed by an authorised representative of Toolstation. 8.9 These terms and conditions including the documents or other sources referred to in these terms and conditions supersede all prior representations understandings and agreements between you and Toolstation relating to the use of this website (including the order of products) and sets forth the entire agreement and understanding between you and Toolstation for your use of this website. Please note that this applies to the individual product price only.
This is not a full list of non matched promotions and is for indicative purposes only. This policy has all the information you?Ll need to understand when and how you can do this. I've changed my mind. Certain products will be exempt from the'Change of Mind' clause, these include goods that are cut, mixed or made to your requirements, as well as used macerators, toilets and dirty water pumps. We cannot accept the return of unwanted boilers, boiler parts or boiler spares where the product box/packaging has been opened. Please wait for us to accept your Return Request BEFORE returning your product. My item has been damaged in transit. We do our utmost to ensure our items are carefully packed and protected, however, sometimes damage can occur in transit.
Once you have received your item, please ensure you check it for any damage straight away. Any damage reported after this period will not be considered as transit damage. We are confident in the products that we sell, should a fault occur please see our policy, which is in addition to your legal rights.
HINT: Always make sure you insure the item you are returning. In the event of transit damage, we will not be able to make any repairs and you will need to claim the cost of the item from the courier. If you are returning an item, we would recommend taking photos of the item before you pack and send it. This will act as evidence of condition before transit should you need to make a claim against the courier.
Solvent Weld Straight Coupling 32mm Grey. Ragni Stainless Steel Putty Knife 3 Flexible.
Toolstation opened for business in 2003, and is managed by an experienced team that is focused on working efficiently - keeping costs low so that customers enjoy reliable trade products at unbeatable prices. Industry-leading customer, warehousing and supply systems mean that, while maintaining rapid growth, Toolstation continues to meet its promise to thousands of customers across the UK.Toolstation now has over 400 branches nationwide, open early til late, 7 days a week. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Cordless Drills". The seller is "toolstation_ltd" and is located in this country: GB.
This item can be shipped to United Kingdom.